Home Inquiry Site Map
Products
TJ2996 Home > Products > DDR-II Termination Voltage Regulator > TJ2996
DDR Termination Regulator
FEATURES
  - Source and sink current
- Low output voltage offset
- No external resistors required
- Linear topology
- Suspend to Ram (STR) functionality
- Low external component count
- Thermal Shutdown
- Available in SOP8, SOP8-PP Packages
TJ2996
SOP8 & SOP8PP
DESCRIPTION
  The TJ2996 linear regulator is designed to meet the JEDEC SSTL-2 and SSTL-3 specifications for termination of DDR-SDRAM. The device contains a high-speed operational amplifier to provide excellent response to load transient. The output stage prevents shoot through while delivering 1.5A continuous current and transient peaks up to 3A in the application as required for DDR-SDRAM termination. The TJ2996 also incorporates a VSENSE pin to provide superior load regulation and a VREF output as a reference for the chipset and DIMMs. An additional feature found on the TJ2996 is an active low shutdown pin that provides Suspend To RAM (STR) functionality. When is pulled low the VTT output will tri-state providing a high impedance output, but, VREF will remain active. A power savings advantage can be obtained in this mode through lower quiescent current.
Copyright 2021 TAEJIN Technology Co., Ltd. All Rights Reserved.