Home Inquiry Site Map
Products
DS1232 Home > Products > Etc > DS1232
MICRO-MONITOR
FEATURES
  - Halts and restarts an out-of-control µ-processor
- Holds µ-processor in check during power transients
- Automatically restarts µ-processor after power failure
- Monitors push-button for external override
- Accurate 5% or 10% µ-processor power supply monitoring
- Eliminates the need for discrete components
DESCRIPTION
  The DS1232 Micro-Monitor monitors three vital conditions for a microprocessor: power supply, software execution, and external override. First, a precision temperature compensated reference and comparator circuit monitors the status of VCC. When an out-of-tolerance condition occurs, an internal power fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signals are kept in the active state for a minimum of 250ms to allow the power supply and processor to stabilize. The second function the DS1232 performs is pushbutton reset control. The DS1232 debounces the pushbutton input and guarantees an active reset pulse width of 250ms minimum. The third function is a watchdog timer. The DS1232 has an internal timer that forces the reset signals to the active state if the strobe input is not driven low prior to time-out. The watchdog timer function can be set to operate on time-out settings of approximately 150ms, 600ms, and 1.2 seconds.
DS1232
DIP8
 
SOP8
Copyright 2021 TAEJIN Technology Co., Ltd. All Rights Reserved.